12,000 - 13,500 BTU
Toshiba Split 1.5 HP
Bedrooms, small office rooms (up to 18 m²)
- Hybrid Inverter
- Plasma Filter
- Sleep Mode
- R-410A/R-32 freon
Price range set after inspection (typical service)
Toshiba AC Preventive Maintenance — 7 Tips to Extend Its Life
Japanese Toshiba ACs last 12-15 years with simple preventive maintenance. Following these tips reduces the chance of major failures by 75%.
Weekly
Clean the indoor filter every 2 weeks (in summer)
Clogged filter is the #1 cause of cooling efficiency loss and 25% higher power consumption. Open indoor unit cover, remove filter, wash with lukewarm water and mild soap, dry, refit. Takes 5 minutes.
Monthly
Clean outdoor condenser coil every 6 months
The outdoor unit gets clogged with dust, hair, and leaves, especially in Cairo. Reverse pressure water cleaning improves cooling efficiency by 20% and prevents code F0/P2. Cost a price set after inspection per unit.
Yearly
Install a certified voltage stabilizer
Egypt's voltage fluctuation causes 65% of Inverter board and compressor failures. Stabilizer 4 KVA for 1.5 HP, 5 KVA for 2.25 HP, 6 KVA for 3 HP. set after inspection saves thousands and prevents code E5/P0.
Yearly
Check drain hose before summer starts
Drain hose gets clogged with algae and dust over winter. Clearing with nitrogen pressure before first summer use prevents water dripping on wall. Cost a price set after inspection.
Daily
Don't lower temperature below 18°C
Setting temperature to 16°C for hours leads to frozen coil and cooling efficiency loss. Optimal temp for comfort and energy savings = 22-24°C. Each degree below 22°C increases power consumption by 6%.
Daily
Let it cool the space before setting to Auto
Start the AC on Cool mode at 22°C for 30 min before switching to Auto Mode. This reduces compressor load and extends its life. Especially useful with Hybrid Inverter models.
Yearly
Book an annual pre-summer maintenance contract
Annual maintenance contract with Agent Site (a price set after inspection/year per unit) includes: deep filter and outdoor coil cleaning, freon pressure check, refill if needed, full electrical inspection, drain hose check, bearing lubrication. Prevents 85% of sudden summer failures.