Authorized AEG AEG Dishwashers Service

AEG Dishwasher Repair - Service Center in Egypt | Call 16062

AEG dishwasher repair in Egypt for freestanding, built-in, 45cm and 60cm models. We diagnose no fill, no drain, no start, poor cleaning, poor drying, no heating, water leakage, loud noise, door not closing, spray arm not rotating, i10, i20, i30, i40 codes, drain pump, circulation pump, inlet valve, pressure sensor, heater, PCB and filter faults. Call 16062.

  • Original certified parts
  • 6-month written warranty
  • 1-hour arrival in Cairo
  • AEG-trained specialists
Call Now: 16062 WhatsApp
AEG Dishwashers
AEG
+15 years
24/7 available
6m warranty

AEG Dishwasher Repair - Water Cycle & Drying Diagnosis Before Parts Replacement

AEG Dishwashers

If you are looking for AEG dishwasher service number, the key is choosing a technician who understands the full water cycle: inlet valve, pressure sensor, circulation pump, spray arms, filter, drain pump, heater, temperature sensor, PCB and drying system.

We service AEG built-in, freestanding, 60cm and 45cm dishwashers, including AirDry, AutoSense, SatelliteClean and GlassCare models. Diagnosis covers water pressure, inlet valve, pressure sensor, bottom filter, drain pump, circulation pump, spray arms, heater, temperature sensor, door gasket, anti-flood float and PCB.

AEG dishwasher service number: 16062 — i10, i20, i30 and i40 code diagnosis, water cycle, heater, drying, pumps, sensors and PCB checks, with final cost after inspection and before repair.
Fault Diagnosis

AEG Dishwasher Symptoms & Solutions

AEG dishwasher faults usually appear as a code or clear symptom: no fill, no drain, poor cleaning, poor drying, leakage, loud noise or incomplete cycle.

01 AEG dishwasher not filling with water Estimated after inlet diagnosis Tech needed

The dishwasher starts but water does not enter, or i10 appears.

Most likely causes

  • 1 Closed tap or weak water pressure
  • 2 Blocked inlet valve filter
  • 3 Bent inlet hose
  • 4 Faulty inlet valve
  • 5 Water level/pressure sensor
  • 6 PCB issue

What to do

Water pressure, tap, filter, hose and valve are checked before judging sensor or PCB.

Estimated cost Estimated after inlet diagnosis
02 AEG dishwasher not draining Estimated after drain diagnosis Tech needed

Water remains at the bottom or i20 appears during/after program.

Most likely causes

  • 1 Blocked bottom filter
  • 2 Bent or wrongly installed drain hose
  • 3 Weak/faulty drain pump
  • 4 Food debris in drain path
  • 5 Sink or drain connection blockage

What to do

Filter, drain hose, pump and drain path are checked. Pump is not replaced before excluding blockage.

Estimated cost Estimated after drain diagnosis
03 AEG dishwasher leaking water Estimated after leak source diagnosis Specialist

Water appears under the appliance or door, or i30 anti-flood code appears.

Most likely causes

  • 1 Damaged or dirty door gasket
  • 2 Excess foam from wrong detergent
  • 3 Internal hose/fitting leak
  • 4 Base anti-flood float
  • 5 Unit not level
  • 6 Pump or internal tub leak

What to do

Leak source is identified accurately. i30 requires checking gasket, base, hoses and foam, not direct part replacement.

Estimated cost Estimated after leak source diagnosis
04 AEG dishwasher not cleaning dishes well Estimated by cleaning fault cause Tech needed

Dishes come out with food residue, grease or white spots despite program completing.

Most likely causes

  • 1 Dirty filter
  • 2 Blocked spray arms
  • 3 Weak circulation pump
  • 4 Wrong loading blocking spray arm
  • 5 Wrong detergent/tablets
  • 6 Low salt or rinse aid
  • 7 Water not heating well

What to do

Filters, spray arms, circulation pump and heater are checked before judging PCB or replacing pump.

Estimated cost Estimated by cleaning fault cause
05 AEG dishwasher not drying Estimated by drying system Tech needed

Dishes come out wet or with many water drops, especially plastics and glasses.

Most likely causes

  • 1 Low rinse aid
  • 2 Program without strong drying
  • 3 AirDry fault or door not opening
  • 4 Heater or temperature sensor
  • 5 Wrong loading holding water
  • 6 Dirty filter or internal ventilation

What to do

Rinse aid, AirDry, temperature sensor, heater and loading method are checked before replacing parts.

Estimated cost Estimated by drying system
06 AEG dishwasher not heating water Estimated by heating circuit Specialist

Program runs but dishes do not clean/dry well due to no water heating.

Most likely causes

  • 1 Faulty heater
  • 2 Faulty temperature sensor
  • 3 Scale on heating circuit
  • 4 PCB not sending heat command
  • 5 Wiring issue

What to do

Heater, temperature sensor and wiring are measured before replacing heater or PCB.

Estimated cost Estimated by heating circuit
07 AEG dishwasher spray arm not rotating Estimated after spray arm check Tech needed

Spray arm is stuck or dishes in one rack are not cleaned well.

Most likely causes

  • 1 Food debris blocking spray holes
  • 2 Wrong loading blocking rotation
  • 3 Weak pressure from circulation pump
  • 4 Broken or damaged arm
  • 5 Dirty filter reducing water pressure

What to do

Spray arms are cleaned, rotation and circulation pressure checked before arm replacement.

Estimated cost Estimated after spray arm check
08 Loud noise from AEG dishwasher Estimated after noise source diagnosis Tech needed

Grinding, buzzing or rubbing noise during washing or draining.

Most likely causes

  • 1 Foreign object in drain pump
  • 2 Weak/faulty circulation pump
  • 3 Spray arm hitting dish
  • 4 Filter not installed correctly
  • 5 Pump motor or internal bearing

What to do

Noise source is identified: drain pump, circulation pump, spray arm or filter before replacement.

Estimated cost Estimated after noise source diagnosis
09 AEG dishwasher door not closing Estimated by lock or hinge Tech needed

Door does not close properly or program does not start due to door issue.

Most likely causes

  • 1 Faulty door lock
  • 2 Weak hinge or door spring
  • 3 Door gasket displaced
  • 4 Rack not seated correctly
  • 5 Built-in installation pressing on door

What to do

Lock, hinges, gasket and built-in installation are checked, especially integrated models.

Estimated cost Estimated by lock or hinge
Capacities

We Service All AEG Dishwasher Types & Sizes

AEG dishwashers come as built-in, freestanding, 60cm family models, 45cm compact models and advanced AirDry/AutoSense models. Built-in units require careful cabinet disassembly and installation checks.

Most Popular
Integrated inside kitchen cabinets

AEG Built-in Dishwasher

Modern kitchens and integrated units
  • AirDry
  • PCB
  • pressure sensor
  • door gasket
  • drain pump
  • built-in installation
Price range Estimated by installation and fault
Most Popular
Standalone appliance

AEG Freestanding Dishwasher

Flexible home use
  • Inlet valve
  • circulation pump
  • drain pump
  • heater
  • spray arms
Price range Estimated after inspection
Most Popular
Full family capacity

AEG 60cm Dishwasher

Medium and large families
  • Multiple racks
  • strong circulation pump
  • spray arms
  • drying
  • AutoSense
Price range Estimated by fault and model
Most Popular
Slimline / compact space

AEG 45cm Dishwasher

Small kitchens and medium use
  • Slim design
  • precise spray arms
  • water sensor
  • drying
Price range Estimated by installation and fault
Most Popular
Automatic door-opening drying

AEG AirDry Dishwasher

Better drying and lower energy use
  • AirDry
  • door lock
  • hinge
  • temperature sensor
  • drying program
Price range Estimated by door and drying system
Most Popular
Automatic programs by soil level

AEG AutoSense Dishwasher

Smart cleaning and balanced consumption
  • Turbidity sensor
  • pressure sensor
  • PCB
  • automatic program
Price range Estimated by sensors and PCB

Prices are approximate and unofficial. They vary by dishwasher type, age, pump condition, PCB, heater, spare parts availability and built-in disassembly complexity.

Models

AEG Dishwasher Models We Service

We service AEG dishwashers by type, technology and fault. When calling 16062, tell us whether it is built-in or freestanding, 45cm or 60cm, and if i10, i20, i30 or i40 appears.

Best Seller
AEG Built-in 60cm AEG Built-in 60cm Dishwasher
Family capacity / integrated
AirDryAutoSenseCirculation pumpPressure sensorPCB
Best Seller
AEG Freestanding 60cm AEG Freestanding Dishwasher
Standalone / 60cm
Inlet valveBottom filterDrain pumpHeaterSpray arms
Best Seller
AEG Slimline 45cm AEG 45cm Slimline Dishwasher
Compact space
Slim designCirculation pumpSpray armsWater sensorDrying
Best Seller
AEG AirDry AEG AirDry Dishwasher
Automatic drying
Auto door openingTemperature sensorDoor lockHingesDrying program
Best Seller
AEG SatelliteClean AEG SatelliteClean Dishwasher
Multi-direction spray cleaning
Dual spray armCirculation pumpWater pressureFilterSprayers
Best Seller
AEG AutoSense AEG AutoSense Dishwasher
Automatic program
Turbidity sensorPressure sensorPCBWater consumptionProgram duration
Technologies

AEG Dishwasher Technologies We Repair

AEG dishwasher repair starts by understanding water, washing and drying cycles. Poor cleaning may be blocked spray arms, weak circulation pump, dirty filter, wrong detergent, weak water pressure or AutoSense misreading.

01

SatelliteClean

Multi-direction spray technology helps water reach more areas. Blocked spray arms or weak circulation pump cause poor cleaning even when program completes.

Benefits
  • Wider cleaning coverage
  • Better water reach
  • Improved washing with proper loading
Drawbacks
  • Blocked spray arms reduce performance
  • Wrong loading prevents arm rotation
Common faults

Poor cleaning, spray arm not rotating, food residue, weak pump noise

02

AirDry Drying System

AirDry opens the door at the end of the cycle for natural drying. If door does not open or dishes remain wet, door lock, hinges, temperature sensor and drying program are checked.

Benefits
  • Better drying
  • Lower energy use
  • Less internal steam
Drawbacks
  • Lock or hinge fault prevents opening
  • Wrong rinse aid use reduces drying
Common faults

Poor drying, door not opening automatically, excess steam, damp smell

03

AutoSense Program

AutoSense adjusts program time and water according to soil level. If sensor misreads, cycle may be too long, too short or clean poorly.

Benefits
  • Balanced water usage
  • Cycle time by soil level
  • Convenient daily use
Drawbacks
  • Turbidity sensor affected by grease and scale
  • Dirty filters change program reading
Common faults

Long cycle, poor cleaning, abnormal water use, repeated stops

04

GlassCare

GlassCare protects glasses from excessive heat and pressure. If glass gets cloudy or damaged, temperature, water distribution, salt and rinse aid are checked.

Benefits
  • Better glass care
  • Less clouding
  • Better temperature control
Drawbacks
  • Low salt/rinse aid causes clouding
  • Wrong glass loading causes breakage
Common faults

Cloudy glasses, white spots, glass damage, poor drying

05

Water Inlet System

i10 usually relates to water inlet. Diagnosis includes water pressure, tap, inlet hose, valve filter, inlet valve and water level sensing.

Benefits
  • Accurate filling
  • Protection from low water
  • Correct program operation
Drawbacks
  • Weak pressure stops cycle
  • Blocked filter appears as fill code
Common faults

i10, no fill, program not starting, weak fill sound

06

Drain System

i20 usually indicates drainage issue: blocked filter, bent drain hose, weak drain pump or food debris in drain path.

Benefits
  • Water removal before drying
  • Prevents odors
  • Prevents program stop
Drawbacks
  • Food debris blocks filter and pump
  • Wrong hose installation causes backflow
Common faults

i20, standing water, smell, no drain, stops before end

07

Circulation Pump & Spray Arms

Circulation pump powers spray arms. Weak pump or blocked arms causes poor cleaning despite water inside the machine.

Benefits
  • Proper cleaning pressure
  • Water reaches all racks
  • Better grease removal
Drawbacks
  • Grease and food residue weaken pump
  • Spray arms need periodic cleaning
Common faults

Poor cleaning, pump noise, arm not rotating, food residue

08

Heater & Temperature Sensor

Heater warms water and supports drying. If heater or sensor fails, dishes may not clean well or remain wet.

Benefits
  • Better grease cleaning
  • Higher hygiene
  • Stronger drying
Drawbacks
  • Scale affects heating
  • Sensor fault can stop program or weaken drying
Common faults

No heating, poor drying, long cycle, grease residue

Error Codes

AEG Dishwasher Error Codes

AEG dishwasher codes guide diagnosis, not immediate replacement. i10 points to water inlet, i20 to drainage, i30 to leakage and i40 to pressure/level sensing.

Code Meaning Likely cause Est. cost Level
i10 Dishwasher does not fill with water in time Weak water pressure, closed tap, blocked valve filter, bent hose, inlet valve or level sensor Estimated after inlet diagnosis Medium
i20 Drainage fault Blocked bottom filter, bent drain hose, drain pump, food residue or drain path blockage Estimated after drain diagnosis Medium
i30 Leakage or anti-flood protection activation Water in base, door gasket, excess foam, internal hose, pump or incorrect leveling Estimated after leak source diagnosis Critical
i40 Pressure sensor or water level issue Pressure sensor, sensor hose, pressure chamber blockage or wrong water reading Estimated after sensor diagnosis Medium
i50 Motor or wash pump fault Circulation pump, motor, PCB or obstruction inside pump Estimated after circulation pump check Critical
i60 Heating fault Heater, temperature sensor, scale, wiring or PCB Estimated by heating circuit Medium
i70 Temperature sensor fault Bad temperature sensor, disconnected wire or abnormal reading Estimated by sensor Medium
i80 / i90 PCB or electronic communication fault PCB, display module, wiring, programming or voltage fluctuation Estimated after PCB and power check Critical
Poor Drying Poor drying Rinse aid, AirDry, heater, temperature sensor or loading method Estimated after drying diagnosis Medium
Poor Cleaning Poor cleaning Filter, spray arms, circulation pump, detergent, salt or heater Estimated after wash cycle diagnosis Medium
i10 Medium

Dishwasher does not fill with water in time

Weak water pressure, closed tap, blocked valve filter, bent hose, inlet valve or level sensor

Estimated after inlet diagnosis
i20 Medium

Drainage fault

Blocked bottom filter, bent drain hose, drain pump, food residue or drain path blockage

Estimated after drain diagnosis
i30 Critical

Leakage or anti-flood protection activation

Water in base, door gasket, excess foam, internal hose, pump or incorrect leveling

Estimated after leak source diagnosis
i40 Medium

Pressure sensor or water level issue

Pressure sensor, sensor hose, pressure chamber blockage or wrong water reading

Estimated after sensor diagnosis
i50 Critical

Motor or wash pump fault

Circulation pump, motor, PCB or obstruction inside pump

Estimated after circulation pump check
i60 Medium

Heating fault

Heater, temperature sensor, scale, wiring or PCB

Estimated by heating circuit
i70 Medium

Temperature sensor fault

Bad temperature sensor, disconnected wire or abnormal reading

Estimated by sensor
i80 / i90 Critical

PCB or electronic communication fault

PCB, display module, wiring, programming or voltage fluctuation

Estimated after PCB and power check
Poor Drying Medium

Poor drying

Rinse aid, AirDry, heater, temperature sensor or loading method

Estimated after drying diagnosis
Poor Cleaning Medium

Poor cleaning

Filter, spray arms, circulation pump, detergent, salt or heater

Estimated after wash cycle diagnosis
Diagnostic Mode

AEG Dishwasher Technical Diagnosis

AEG dishwasher diagnosis starts with code or symptom, then testing the related water circuit. Pump, PCB or heater is not replaced before checking filters, hoses, sensors and wiring.

How to enter test mode

  1. 1 Identify unit type: built-in or freestanding, 45cm or 60cm
  2. 2 Read displayed code if present
  3. 3 Ask whether the issue is filling, draining, cleaning, drying, leakage or noise
  4. 4 Check water pressure and inlet valve for i10
  5. 5 Check bottom filter, drain hose and pump for i20
  6. 6 Check base, gasket, foam and hoses for i30
  7. 7 Check pressure sensor and chamber for i40
  8. 8 Check circulation pump and spray arms for poor cleaning
  9. 9 Check heater and temperature sensor for poor drying or i60
  10. 10 Check AirDry, door lock and hinges for drying faults
  11. 11 Check PCB and power after excluding simpler causes

What it tests

1
Water inlet test Checks water pressure, tap, valve filter, inlet hose and inlet valve.
2
Drain test Cleans bottom filter and checks drain hose, drain pump and drain path.
3
Leak test Checks door gasket, base, float, hoses and excess foam.
4
Pressure sensor test Checks water level sensor, hose and pressure chamber for i40.
5
Circulation pump test Checks spray pressure, pump noise and water circulation ability.
6
Spray arm test Checks blocked spray holes, free rotation and dish obstruction.
7
Heater and temperature sensor test Measures heating circuit and temperature sensor for poor cleaning or drying.
8
AirDry and door test Checks automatic door opening, lock, hinges and end-of-cycle behavior.
9
PCB and power test Checks power, wiring and sensors before judging PCB.
Pricing

AEG Dishwasher Repair & Spare Parts Cost

AEG dishwasher repair cost varies by unit type: built-in, freestanding, 45cm or 60cm, and by fault: inlet, drainage, leakage, poor cleaning, poor drying, heater, pump, sensor, PCB or door lock. Final cost is determined after inspection.

Spare Parts

12
  • AEG Dishwasher Drain Pump For i20 or standing water
    Estimated by model
  • Circulation Pump / Wash Motor For poor cleaning or spray arms not rotating
    Estimated after pressure test
  • Water Inlet Valve For i10 or no-fill fault
    Estimated by outlet count
  • Pressure / Water Level Sensor For i40 or wrong water level reading
    Estimated by code and model
  • AEG Dishwasher Heating Element For no heating or poor drying
    Estimated by heating circuit
  • Temperature Sensor For i70 or wrong temperature reading
    Estimated by sensor
  • AEG Dishwasher Spray Arms For poor cleaning or spray arm not rotating
    Estimated by spray arm
  • Dishwasher Door Gasket For water leakage from door
    Estimated by size
  • Door Lock / Door Switch For door not closing or no-start fault
    Estimated by design
  • AEG Dishwasher PCB Not replaced before checking sensors and power
    Estimated after inspection
  • Anti-Flood Float / Sensor For i30 after checking base water source
    Estimated by condition
  • Door Hinges / Springs For door opening/closing or AirDry faults
    Estimated by set

Labor & Inspection Fees

  • Technical inspection and fault diagnosis Estimated by area and appliance type
  • Error code diagnosis Estimated by code and model
  • Inlet and drainage diagnosis Estimated after valve and pump check
  • Leakage and i30 diagnosis Estimated after leak source diagnosis
  • Poor cleaning and circulation pump diagnosis Estimated after spray arms and pump check
  • Heater and drying diagnosis Estimated after heater and sensor check
  • Built-in dishwasher disassembly/reinstallation Estimated by kitchen design

⚠️ Listed prices are approximate and unofficial. They may vary depending on fault type, dishwasher age, pump condition, heater, PCB, spare parts availability and built-in disassembly complexity. Final cost is confirmed before repair.

Care & Maintenance

AEG Dishwasher Preventive Maintenance

Advanced AEG dishwashers need proper use and periodic filter/spray arm cleaning. Many cleaning, draining and drying faults start from food residue, wrong detergent, low salt or wrong loading.

Weekly

Clean bottom filter regularly

Food residue in the filter causes i20, odor and poor cleaning.

Monthly

Check spray arm holes

Blocked spray holes stop water from reaching dishes and reduce cleaning.

Daily

Use suitable detergent or tablets

Wrong detergent or excess amount causes foam, spots or poor drying.

Weekly

Check salt and rinse aid

Low salt or rinse aid causes white spots, cloudy glasses and poor drying.

Daily

Load dishes without blocking spray arms

Large plate or long spoon can block spray arm rotation and weaken cleaning.

Daily

Do not load large food residue

The dishwasher handles grease and small residue, but large food pieces block filter and pump.

Daily

Let the door ventilate after cycle

Ventilation after the cycle reduces humidity and odors, especially if AirDry is off or program is short.

Yearly

Avoid unstable power

PCB and sensors in advanced appliances may be affected by repeated voltage fluctuation.

Customers

AEG Dishwasher Repair Reviews

غسالة أطباق AEG كانت بتعرض i20 ومياه بتفضل في القاع. الفني نضف الفلتر وفحص خرطوم الصرف والطلمبة وشرح سبب العطل.

غسالة أطباق AEG بلت إن
أحمد عادل التجمع الخامس

الأطباق كانت بتطلع مش نضيفة. الفني فحص الرشاشات وطلمبة التدوير والفلتر، وطلع في انسداد في فتحات الرش.

غسالة أطباق AEG SatelliteClean
منى خالد الشيخ زايد

ظهر كود i30 وكنت فاكر الجهاز باظ. الفني حدد إن السبب رغوة زائدة ومياه في القاعدة، واتعمل فحص للتسريب.

غسالة أطباق AEG 60 سم
محمود حسين مدينة نصر

الغسالة كانت لا تجفف كويس. الفني فحص مساعد الشطف ونظام AirDry وحساس الحرارة قبل ما يحدد الإصلاح.

غسالة أطباق AEG AirDry
FAQ

FAQs About AEG Dishwasher Repair

What is AEG dishwasher service number in Egypt?
AEG dishwasher service number is 16062. Tell us whether built-in/freestanding, 45/60cm and any displayed code.
What does i10 mean on AEG dishwasher?
i10 usually indicates water inlet issue: pressure, tap, valve filter, hose, inlet valve or level sensor.
What should I do with AEG i20 code?
i20 usually indicates drainage issue. Filter, hose, pump and drain path are checked before pump replacement.
What does i30 mean on AEG dishwasher?
i30 usually means water in the base or anti-flood activation. It may be gasket, hose, foam, pump or leveling issue.
Why is my AEG dishwasher not cleaning well?
It can be dirty filter, blocked spray arms, weak circulation pump, wrong loading, detergent, salt/rinse aid or no heating.
AEG dishwasher not drying — is the heater faulty?
Not always. It can be rinse aid, short program, AirDry, loading, temperature sensor or heater.
Do you repair AEG built-in dishwashers?
Yes, we repair built-in and freestanding AEG dishwashers with careful cabinet disassembly and installation checks.
Why does my AEG dishwasher smell bad?
Odor is usually dirty filter, food residue in drain path, standing water, wrong drain hose or poor ventilation.
How much does AEG dishwasher repair cost?
AEG dishwasher repair cost varies by appliance type, fault, age, pumps, heater, PCB and spare parts. Final cost is confirmed after inspection.
Do you provide AEG customer service or agency repair?
We provide specialized AEG appliance repair service. Call 16062.
Available 24/7

Need AEG Dishwasher Repair? Call 16062

Looking for AEG dishwasher repair, AEG service number, customer service, hotline or technician near you? Call 16062. Tell us model and symptom: no fill, no drain, leakage, poor cleaning, poor drying, i10, i20, i30, i40, loud noise, door issue or spray arm fault.

Call: 16062 WhatsApp
1-hour response
6-month warranty
Original parts