Authorized AEG AEG Ovens Service

AEG Oven Repair - Service Center in Egypt | Call 16062

AEG oven repair in Egypt for built-in, electric, gas, steam, Pyrolytic, SteamBake, SteamCrisp, SurroundCook and SenseCook ovens. We diagnose oven not heating, overheating, uneven cooking, grill failure, fan not spinning, loud fan noise, temperature sensor faults, door not closing, door lock stuck, display failure, touch panel fault, PCB, upper/lower heaters, door gasket and F1, F2, F3, F4, F5, F7, F8 and F9 codes. Call 16062.

  • Original certified parts
  • 6-month written warranty
  • 1-hour arrival in Cairo
  • AEG-trained specialists
Call Now: 16062 WhatsApp
AEG Ovens
AEG
+15 years
24/7 available
6m warranty

AEG Oven Repair - Heat & PCB Diagnosis Before Parts Replacement

AEG Ovens

If you are looking for AEG oven service number, the key is choosing a technician who understands advanced European ovens: temperature sensor, thermostat, convection fan, cooking programs, display/touch, door lock, gasket and, in some models, Pyrolytic self-cleaning or SteamBake/SteamCrisp steam systems.

We service AEG built-in, electric, gas, steam, grill, fan, Pyrolytic, SteamCrisp and SteamBake ovens depending on the model. Diagnosis starts with symptom/code, then upper/lower heaters, grill, temperature sensor, fan, door lock, gasket, control panel, display, touch, PCB and power supply.

AEG oven service number: 16062 — heat, sensors, fan, heater, grill, door lock, PCB and error code diagnosis, with final cost after inspection and before repair.
Fault Diagnosis

AEG Oven Symptoms & Solutions

AEG oven faults usually appear in heating, heat distribution, fan, door, display or error codes.

01 AEG oven not heating Estimated after heating circuit diagnosis Specialist

Oven powers on and display/light works, but temperature does not rise or heat is very weak.

Most likely causes

  • 1 Faulty upper/lower heater
  • 2 Temperature sensor misreading
  • 3 PCB not sending command
  • 4 Door lock blocking program
  • 5 Wiring or thermal fuse
  • 6 Wrong program selection

What to do

Heater, sensor, door, power and PCB are checked before replacement.

Estimated cost Estimated after heating circuit diagnosis
02 AEG oven overheating Estimated after temperature diagnosis Specialist

Oven heats higher than required, food burns quickly or abnormal heat smell appears.

Most likely causes

  • 1 Bad temperature sensor
  • 2 Thermostat or PCB
  • 3 Stuck heating relay
  • 4 Wrong program
  • 5 Fan not distributing heat
  • 6 Bad door gasket affecting reading

What to do

Sensor, relay, PCB and fan are checked before judging heater.

Estimated cost Estimated after temperature diagnosis
03 AEG oven fan not working Estimated by fan and motor Tech needed

Fan does not spin during program, or cooking is uneven.

Most likely causes

  • 1 Faulty fan motor
  • 2 Grease blocking blade
  • 3 Ring heater or wiring
  • 4 PCB not sending command
  • 5 Program does not use fan

What to do

Program, fan movement, motor and wiring are checked before replacing fan.

Estimated cost Estimated by fan and motor
04 Uneven cooking inside AEG oven Estimated after heat distribution check Tech needed

Food cooks on one side and not the other, or burns on top while inside remains undercooked.

Most likely causes

  • 1 Fan not working
  • 2 Weak upper/lower heater
  • 3 Temperature sensor misreading
  • 4 Door gasket leaking heat
  • 5 Tray placement blocking airflow
  • 6 Wrong program

What to do

Heaters, fan, sensor, gasket and program usage are checked.

Estimated cost Estimated after heat distribution check
05 AEG oven door not opening or closing Estimated by lock or hinge Specialist

Door does not seal, gets stuck after self-cleaning or shows door-related code.

Most likely causes

  • 1 Stuck Pyrolytic door lock
  • 2 Weak/broken hinge
  • 3 Bad door gasket
  • 4 Door sensor or PCB
  • 5 Heat after self-cleaning

What to do

Do not force the door. Lock, hinges, gasket and door sensor are checked safely.

Estimated cost Estimated by lock or hinge
06 Pyrolytic cleaning not working Estimated after self-cleaning system diagnosis Specialist

Oven does not start self-cleaning, stops during program or door does not lock.

Most likely causes

  • 1 Door lock not working
  • 2 High-temperature sensor
  • 3 PCB or relay
  • 4 Too much grease residue
  • 5 Thermal protection
  • 6 Door not sealed

What to do

Door lock, sensor, PCB and thermal protection are checked before re-running cleaning.

Estimated cost Estimated after self-cleaning system diagnosis
07 Steam not working in AEG oven Estimated by steam circuit Tech needed

SteamBake or SteamCrisp programs do not produce visible steam or baking result is weak.

Most likely causes

  • 1 Water tank empty/not seated
  • 2 Blocked steam path
  • 3 Scale buildup
  • 4 Temperature or level sensor
  • 5 Steam heater
  • 6 PCB or program

What to do

Tank, steam path, scale and sensors are checked before replacement.

Estimated cost Estimated by steam circuit
08 AEG oven display or touch not working Estimated after PCB and display check Specialist

Display does not light, touch does not respond or programs do not start normally.

Most likely causes

  • 1 Power supply issue
  • 2 Touch/display panel
  • 3 Electronic PCB
  • 4 Moisture or heat on panel
  • 5 Internal wiring
  • 6 Voltage fluctuation

What to do

Power source, display/touch panel and wiring are checked before judging PCB.

Estimated cost Estimated after PCB and display check
09 Loud noise from AEG oven Estimated after noise source diagnosis Tech needed

Rubbing, buzzing or loud fan noise during operation or after shutdown.

Most likely causes

  • 1 Dirty convection fan
  • 2 PCB cooling fan
  • 3 Weak fan motor
  • 4 Unbalanced fan blade
  • 5 Internal mounting issue

What to do

Noise source is identified: convection fan, cooling fan, motor or mounting before replacement.

Estimated cost Estimated after noise source diagnosis
Capacities

We Service All AEG Oven Types

AEG ovens come in multiple designs and technologies: built-in ovens, multi-program electric ovens, steam ovens, Pyrolytic self-cleaning ovens, fan/convection ovens and touch/display ovens. Each type requires different diagnosis.

Most Popular
Integrated inside kitchen cabinet

AEG Built-in Oven

Modern kitchens and integrated appliances
  • Heater
  • fan
  • temperature sensor
  • PCB
  • door lock
  • gasket
Price range Estimated by installation and fault
Most Popular
Multiple heating programs

AEG Electric Oven

Baking, grilling, cooking and roasting
  • Upper heater
  • lower heater
  • grill
  • sensor
  • thermostat
Price range Estimated by heating circuit
Most Popular
Convection heat distribution

AEG Fan Oven

Even cooking and baking
  • Fan
  • fan motor
  • temperature sensor
  • airflow path
  • PCB
Price range Estimated by fan and sensor
Most Popular
High-temperature self-cleaning

AEG Pyrolytic Oven

Heavy use and easier cleaning
  • Pyrolytic
  • door lock
  • high-temp sensor
  • PCB
  • insulation
Price range Estimated by door lock and PCB
Most Popular
Steam-assisted cooking

AEG SteamBake / SteamCrisp Oven

Baking and crisp outside / soft inside cooking
  • Steam
  • water tank
  • temperature sensor
  • heater
  • PCB
  • steam path
Price range Estimated by steam circuit
Most Popular
Electronic or touch display

AEG Touch Control Oven

Precise control and smart programs
  • Touch
  • display
  • PCB
  • sensor
  • cooking programs
Price range Estimated by display and PCB

Prices are approximate and unofficial. They vary by oven type, age, heater, sensors, PCB, door lock, spare parts availability and built-in disassembly complexity.

Models

AEG Oven Models We Service

We service AEG ovens by type, operating system and technologies. When calling 16062, tell us whether it is built-in, electric, gas, steam, Pyrolytic or touch-control, and whether the issue is heating, fan, door, display or code.

Best Seller
AEG Built-in Oven AEG Built-in Oven
Integrated kitchen cabinet
HeaterTemperature sensorFanPCBDoor gasket
Best Seller
AEG SteamBake AEG SteamBake Oven
Steam-assisted cooking
SteamWater tankHeaterSensorSteam path
Best Seller
AEG SteamCrisp AEG SteamCrisp Oven
Steam and crisp cooking
SteamCrispTemperature sensorFanPCBCooking programs
Best Seller
AEG Pyrolytic AEG Pyrolytic Oven
Self-cleaning
Door lockHigh temperatureSensorPCBInsulation
Best Seller
AEG SurroundCook AEG SurroundCook Oven
Heat distribution
FanAirflowTemperature sensorRing heaterPrograms
Best Seller
AEG SenseCook AEG SenseCook Oven
Cooking sensor
Food probeCooking sensorPCBDisplaySmart programs
Best Seller
AEG Touch Oven AEG Touch Control Oven
Electronic control
TouchDisplayPCBSensorDoor lock
Technologies

AEG Oven Technologies We Repair

AEG oven repair starts by understanding heat and control systems. Oven not heating can be caused by heater, temperature sensor, door lock, PCB, fan, wrong program or thermal protection.

01

Upper/Lower Heater & Grill

The heater generates oven heat. AEG ovens may have upper, lower, grill or ring heater around the fan. Weakness in any part causes uneven cooking or no heating.

Benefits
  • Direct heating by program
  • Better grilling and roasting
  • Controlled heat distribution
Drawbacks
  • Faulty heater causes poor cooking
  • Must be measured before replacement
Common faults

Oven not heating, grill not working, weak cooking, cold zone

02

Oven Temperature Sensor

Temperature sensor reads oven temperature and sends it to PCB/thermostat. Wrong reading can cause overheating, weak heating or early cut-off.

Benefits
  • Accurate temperature
  • Stable cooking
  • Overheat protection
Drawbacks
  • Fault mimics heater and PCB issues
  • Needs testing before replacement
Common faults

Overheating, weak heat, temperature code, inaccurate cooking

03

Convection Fan

Oven fan distributes heat inside the cavity. If stopped or weak, cooking becomes uneven; grease/blade rubbing causes noise.

Benefits
  • Better heat distribution
  • Even cooking
  • Suitable for baking
Drawbacks
  • Grease buildup causes noise
  • Fan motor can weaken over time
Common faults

Fan not working, loud noise, one-side cooking, uneven heat

04

SteamBake & SteamCrisp

Steam technologies in AEG ovens improve baking and cooking. Faults may be in water tank, steam path, temperature sensor, heater or PCB.

Benefits
  • Better baking
  • Soft inside
  • Professional cooking result
Drawbacks
  • Scale may affect steam path
  • Needs proper cleaning by usage
Common faults

Steam not working, water not used, weak steam cooking, sensor code

05

Pyrolytic Self Cleaning

Pyrolytic cleaning raises oven temperature very high to burn grease. Door locks automatically. Faults often relate to door lock, high-temp sensor, PCB or insulation.

Benefits
  • Strong self-cleaning
  • Reduces grease buildup
  • Easier daily maintenance
Drawbacks
  • Door lock is critical during cleaning
  • Any heat fault stops program
Common faults

Door not opening after cleaning, lock code, cleaning not starting, abnormal high heat

06

Door Lock & Oven Gasket

Door sealing keeps heat inside. Weak gasket or hinge causes heat loss and slow cooking; door lock is important in Pyrolytic and safety programs.

Benefits
  • Keeps heat inside
  • Faster stable cooking
  • Safety during self-cleaning
Drawbacks
  • Bad gasket wastes heat
  • Stuck lock prevents operation or opening
Common faults

Door not closing, door not opening, heat escaping, F1/F2 code

07

PCB, Display & Touch Control

AEG oven electronics control programs, sensors, heaters and fan. PCB is not replaced before checking sensors, power and wiring.

Benefits
  • Precise cooking programs
  • Better temperature control
  • Easier diagnosis when code appears
Drawbacks
  • Touch, moisture and heat may affect panel
  • Voltage fluctuation can damage PCB
Common faults

Display not working, touch not responding, F5 code, programs not starting

08

SenseCook & Food Probe

Some AEG ovens use food probe to monitor doneness. If probe or sensor port fails, reading becomes wrong and program may stop or extend.

Benefits
  • More precise meat and baking
  • Less over/under-cooking
  • Tracks food internal temperature
Drawbacks
  • Probe needs proper cleaning and use
  • Wrong reading confuses program
Common faults

Program not completing, wrong temperature reading, sensor code, inaccurate cooking

Error Codes

AEG Oven Error Codes

AEG oven codes vary by model, but usually relate to door, door lock, temperature sensor, PCB or power supply. A code guides diagnosis, not immediate replacement.

Code Meaning Likely cause Est. cost Level
F1 Oven door or closing issue Door not closed, weak hinge, bad gasket, door sensor or door lock Estimated after door inspection Medium
F2 Oven door lock stuck or not working Pyrolytic lock, lock sensor, PCB or residual heat after cleaning Estimated by lock Medium
F3 / F4 Oven temperature or sensor fault Temperature sensor, heater, thermostat, fan or wiring Estimated by heating circuit Medium
F5 Possible PCB or processor fault PCB, power supply, sensor sending wrong reading or internal wiring Estimated after sensor and power diagnosis Critical
F7 / F8 / F9 Power issue or repeated processor reset Voltage fluctuation, weak socket, wiring, PCB or internal protection Estimated after power check Critical
No Heat Oven not heating Heater, sensor, thermostat, door lock, PCB or thermal fuse Estimated after heating diagnosis Critical
Overheat Overheating Temperature sensor, relay, PCB, fan or wrong program Estimated after temperature diagnosis Critical
Fan Fault Oven fan fault Fan motor, stuck blade, wiring, PCB or program Estimated by fan Medium
Steam Fault Steam circuit fault Water tank, steam blockage, sensor, steam heater or PCB Estimated by steam circuit Medium
Touch / Display Fault Touch or display fault Display panel, touch, PCB, wiring or voltage fluctuation Estimated after panel diagnosis Medium
F1 Medium

Oven door or closing issue

Door not closed, weak hinge, bad gasket, door sensor or door lock

Estimated after door inspection
F2 Medium

Oven door lock stuck or not working

Pyrolytic lock, lock sensor, PCB or residual heat after cleaning

Estimated by lock
F3 / F4 Medium

Oven temperature or sensor fault

Temperature sensor, heater, thermostat, fan or wiring

Estimated by heating circuit
F5 Critical

Possible PCB or processor fault

PCB, power supply, sensor sending wrong reading or internal wiring

Estimated after sensor and power diagnosis
F7 / F8 / F9 Critical

Power issue or repeated processor reset

Voltage fluctuation, weak socket, wiring, PCB or internal protection

Estimated after power check
No Heat Critical

Oven not heating

Heater, sensor, thermostat, door lock, PCB or thermal fuse

Estimated after heating diagnosis
Overheat Critical

Overheating

Temperature sensor, relay, PCB, fan or wrong program

Estimated after temperature diagnosis
Fan Fault Medium

Oven fan fault

Fan motor, stuck blade, wiring, PCB or program

Estimated by fan
Steam Fault Medium

Steam circuit fault

Water tank, steam blockage, sensor, steam heater or PCB

Estimated by steam circuit
Touch / Display Fault Medium

Touch or display fault

Display panel, touch, PCB, wiring or voltage fluctuation

Estimated after panel diagnosis
Diagnostic Mode

AEG Oven Technical Diagnosis

AEG oven diagnosis starts by identifying oven type and technology, then testing heat, door and control circuits. Heater or PCB is not replaced before checking sensor, fan, lock, gasket and power.

How to enter test mode

  1. 1 Identify oven type: built-in, electric, gas, steam, Pyrolytic or touch-control
  2. 2 Read displayed code or symptom
  3. 3 Ask whether the issue is heating, fan, door, display, steam or self-cleaning
  4. 4 Check power source, socket and supply
  5. 5 Measure upper/lower heaters and grill
  6. 6 Check temperature sensor and thermostat
  7. 7 Check convection fan and cooling fan
  8. 8 Check door lock, gasket and hinges
  9. 9 Check Pyrolytic system for self-cleaning faults
  10. 10 Check water tank and steam path in Steam models
  11. 11 Check display, touch and PCB after excluding sensors and power

What it tests

1
Heating circuit test Measures upper/lower heaters, grill and wiring before replacing any element.
2
Temperature sensor test Compares sensor reading with actual temperature to identify weak or excessive heating.
3
Convection fan test Checks fan movement, noise, wiring and PCB command.
4
Door and gasket test Checks door sealing, gasket and hinges to prevent heat loss.
5
Pyrolytic lock test Checks door lock, lock sensor and thermal protection in self-cleaning faults.
6
Steam circuit test Checks water tank, steam path, sensors and heater in SteamBake and SteamCrisp models.
7
Display and touch test Checks display panel, touch, wiring and moisture/heat effect.
8
PCB and power test Checks power, wiring and sensors before judging PCB.
Pricing

AEG Oven Repair & Spare Parts Cost

AEG oven repair cost varies by appliance type: built-in, electric, gas, steam, Pyrolytic or touch-control, and by fault: heater, temperature sensor, fan, grill, door lock, gasket, display, PCB or steam circuit. Final cost is determined after inspection.

Spare Parts

12
  • AEG Oven Upper / Lower Heater For oven not heating or weak cooking
    Estimated by wattage and model
  • AEG Oven Grill Element For grill not working or weak browning
    Estimated by type
  • AEG Oven Temperature Sensor For inaccurate temperature or F3/F4 code
    Estimated by sensor
  • AEG Oven Fan For heat distribution or fan noise
    Estimated by fan type
  • Oven Fan Motor For fan not spinning or loud noise
    Estimated after inspection
  • AEG Oven Door Lock For door not opening or Pyrolytic not starting
    Estimated by lock
  • Oven Door Gasket For heat loss or poor door sealing
    Estimated by size
  • Oven Door Hinges For door not closing or sagging
    Estimated by set
  • AEG Oven Display / Touch For display or touch not responding
    Estimated after panel diagnosis
  • AEG Oven PCB Not replaced before checking sensors and power
    Estimated after inspection
  • Steam Circuit Repair For SteamBake and SteamCrisp models with weak steam
    Estimated by steam circuit
  • SenseCook Food Probe For food temperature reading or smart cooking program faults
    Estimated by model

Labor & Inspection Fees

  • Technical inspection and fault diagnosis Estimated by area and oven type
  • Heating circuit diagnosis Estimated after heater and sensor check
  • Fan and heat distribution diagnosis Estimated after fan and motor check
  • Door lock and Pyrolytic diagnosis Estimated by lock and system
  • Display, touch and PCB diagnosis Estimated after power and sensors check
  • Steam circuit diagnosis Estimated by oven model
  • Built-in oven disassembly/reinstallation Estimated by kitchen design

⚠️ Listed prices are approximate and unofficial. They may vary depending on fault type, oven age, heater/sensor/PCB condition, spare parts availability and built-in disassembly complexity. Final cost is confirmed before repair.

Care & Maintenance

AEG Oven Preventive Maintenance

Advanced AEG ovens need correct cleaning and use to protect sensors, heaters, fan and PCB. Key points are avoiding grease buildup, avoiding random cleaners on touch panels and checking door/gasket.

Weekly

Clean grease after use

Grease buildup affects fan and sensor and increases smell/smoke.

Monthly

Check oven door gasket

Weak gasket leaks heat and makes cooking take longer.

Weekly

Do not ignore fan noise

Fan noise may be grease, rubbing or weak motor; delaying can cause bigger damage.

Weekly

Use suitable water for steam programs

Hard water may cause scale in steam path and weaken SteamBake or SteamCrisp.

Monthly

Do not run Pyrolytic with excessive grease

Self-cleaning is powerful, but excessive grease may cause smoke, heat and strong smell.

Yearly

Protect PCB from voltage fluctuation

Electronic ovens are sensitive to voltage fluctuation, especially with high-heat programs.

Daily

Do not force a stuck oven door

If door gets stuck after Pyrolytic, wait for cooling and call a technician instead of breaking the lock.

Weekly

Watch uneven cooking

If cooking changes suddenly, check fan, sensor and heater before issue grows.

Customers

AEG Oven Repair Reviews

فرن AEG كان لا يسخن كويس. الفني فحص الهيتر والحساس والمروحة قبل ما يحدد العطل، وشرح التكلفة قبل الإصلاح.

فرن AEG بلت إن
أحمد عادل التجمع الخامس

كان عندي مشكلة إن التسوية مش متساوية. الفني فحص المروحة والهيتر والجوان وطلع السبب من مروحة التوزيع.

فرن AEG SurroundCook
منى خالد الشيخ زايد

الباب علق بعد التنظيف الذاتي. الفني فحص قفل Pyrolytic والحساس من غير ما يكسر الباب.

فرن AEG Pyrolytic
محمود حسين مدينة نصر

برامج البخار كانت ضعيفة. تم فحص خزان المياه ومجرى البخار والحساس واتحل العطل.

فرن AEG SteamBake
FAQ

FAQs About AEG Oven Repair

What is AEG oven service number in Egypt?
AEG oven service number is 16062. Tell us oven type and visible fault.
Why is my AEG oven not heating?
It can be upper/lower heater, temperature sensor, door lock, PCB, thermal fuse, wiring or wrong program.
AEG oven overheating — is it the sensor?
It may be temperature sensor, PCB relay, fan not working or wrong program. Sensor must be measured first.
AEG oven fan not working — should it be replaced?
Not always. It may be grease obstruction, wrong program, wiring or PCB. Fan movement and motor are checked first.
AEG oven door not opening after self-cleaning — what should I do?
Do not force the door. After Pyrolytic, door remains locked until cooling. If still stuck, lock, sensor and PCB are checked.
What does F3 or F4 mean on AEG oven?
Usually related to temperature circuit or sensor depending on model. Sensor, heater and wiring are checked first.
Steam not working in AEG SteamBake oven — why?
It can be water tank, steam path blockage, scale, sensor, steam heater or PCB.
Do you repair AEG built-in ovens?
Yes, we repair AEG built-in, electric, steam and Pyrolytic ovens with careful cabinet handling.
How much does AEG oven repair cost?
AEG oven repair cost varies by oven type, fault, age, heater, sensors, PCB and spare parts.
Do you provide AEG customer service or agency repair?
We provide specialized AEG appliance repair service. Call 16062.
Available 24/7

Need AEG Oven Repair? Call 16062

Looking for AEG oven repair, AEG service number, customer service, hotline or technician near you? Call 16062. Tell us oven type and symptom: not heating, overheating, fan not working, uneven cooking, door not opening, Pyrolytic not working, weak steam, display fault, F1, F2, F3, F4, F5 or PCB issue.

Call: 16062 WhatsApp
1-hour response
6-month warranty
Original parts