Hotel Dryers Repair in Egypt
Large-capacity industrial dryers for hotel linens and towels
6-month written warranty on the repair and the replaced part
Agent Site is an independent repair center — not the manufacturer's authorized service or warranty provider.
Industrial dryer repair for hotel laundries: gas, electric and steam models from 20 to 150 kg. Call 16062 to book a technician at the earliest available slot for your area.
Hotel Dryers Service with Agent Site
Industrial dryer repair for hotel laundries in Egypt. A hotel dryer often runs long hours every day, so any stoppage delays linen, towels and staff uniforms and disrupts Housekeeping. We service all three types: gas-heated dryers (usually the fastest and cheapest to run — for hotels with natural gas), electric dryers (the best fit for hotels without a gas line, though they use a lot of electricity) and steam-heated dryers (for hotels with a central steam boiler). Call 16062.
Our technicians work on Electrolux Professional, Miele Professional, Girbau, Speed Queen and other dryers. The work covers: replacing heat sources (gas burners, electric heating elements or steam coils), replacing large drum bearings and drive belts, cleaning lint filters and exhaust ducts, checking safety sensors, and installing new dryers and connecting them to the prepared gas, power and steam points. Periodic maintenance visits can also be arranged. Call 16062.
- Gas, electric and steam dryer maintenance
- Capacities from 20 to 150 kg
- Technicians who work on Electrolux Professional, Miele Professional and Girbau
- Visits daily 9 AM–9 PM at the earliest available slot for your area
- Original or compatible parts, depending on the part and model + a 6-month written warranty on the repair and the replaced part
- An official invoice and a clear price before any work
Hotel Dryers Services
Book a service- Gas Burner, Igniter and Flame Sensor Replacement
- Industrial Electric Heating Element Replacement
- Steam Coil and Steam Solenoid Valve Maintenance
- Large Drum Bearing Replacement
- Industrial Drive Belt Replacement
- Lint Filter and Exhaust Duct Cleaning
- Safety Sensor Replacement (Temperature, Door, Filter)
- Control Board (PCB) Repair
- Drum Glide and Seal Replacement
- Gas Connection and Burner Safety Check (Gas Models)
- New Industrial Dryer Installation (to the Prepared Gas, Power and Steam Points)
- Periodic Maintenance Contracts for Hotels
Hotel Dryers Types We Service
Gas-Heated Industrial Dryer Repair for Hotels
Gas-heated hotel dryers are usually the fastest and cheapest to run: a gas burner heats the air quickly, and capacities range from about 20 to 150 kg. We repair gas dryers from Electrolux Professional, Miele Professional, Girbau, Speed Queen and other brands. Call 16062.
A gas-heated dryer has a burner, a spark igniter, a flame sensor, a solenoid gas valve, a high-limit thermostat, a drum motor, a blower, a lint filter and an exhaust damper. Because it combines gas and heat, its safety components must stay in good order. Common faults: a faulty igniter, a dirty flame sensor, a failed gas valve or a clogged burner.
Signs it needs service
- The burner does not ignite (clicking with no flame)
- The flame lights then dies after a few seconds (flame sensor)
- Drying time has increased noticeably
- The unit is very hot to the touch on the outside
- An error code on the controller
Common faults
- Faulty spark igniter module
- Flame sensor fouled with carbon
- Burned-out gas valve (solenoid)
- Clogged burner jets
- Faulty high-limit thermostat
- Clogged lint filter and exhaust
What we do
- Replacing the spark igniter module
- Cleaning the flame sensor
- Replacing the gas valve
- Cleaning the burner jets
- Replacing the high-limit thermostat
- Cleaning the lint filter and exhaust ductwork
- Checking the appliance gas connection for leaks
- Replacing drum bearings
Care tips
- Have a qualified technician check the gas connections regularly — don't test gas lines yourself
- Clean the lint filter after every cycle
- Clean the exhaust ductwork regularly — built-up lint in the ducts causes fires
- If you smell gas: shut the gas valve, open the windows, don't touch any electrical switch or use any flame, leave the area and call the gas emergency line 129
Questions
The burner does not ignite — what is the cause?
Common causes: a faulty spark igniter, a dirty flame sensor or a failed gas valve. Don't keep retrying ignition, and if you smell gas, shut the valve, leave the area and call the gas emergency line 129. For inspection and repair: 16062.
The flame lights, then goes out after a few seconds — why?
Usually the flame sensor is fouled with carbon or weak, so the controller shuts the gas off for safety. Cleaning or replacing the sensor fixes it — a job for a technician.
Do you repair Speed Queen commercial dryers?
Yes — we repair Speed Queen commercial gas and electric dryers.
Electric Industrial Dryer Repair for Hotels
Electric industrial dryers suit hotels without a gas line: cleaner to run with no gas components, but they draw a lot of electricity. We repair electric dryers from Miele Professional (such as the PT 8000 series), Electrolux Professional, Girbau and other brands. Call 16062.
An electric dryer has large heating coils, a drum motor, a blower, thermostats, a safety cut-off and a lint filter. It has no gas components, but it draws a high current, so the cables and the panel must be rated for the load. Common faults: burned-out heating coils, a faulty thermostat, a tripped safety cut-off and worn drum bearings.
Signs it needs service
- The dryer does not heat
- It heats weakly (only one coil working)
- The breaker trips on start-up
- Drying time has increased noticeably
- The unit switches off on its own
- A burnt plastic smell
Common faults
- Burned-out heating coils (the most common)
- Faulty thermostat
- Blown safety cut-off fuse
- Worn drum bearings
- Clogged lint filter
- Worn drive belt
What we do
- Replacing the industrial heating coils
- Replacing and calibrating the thermostat
- Replacing the safety cut-off
- Replacing the drum bearings
- Cleaning the lint filter and exhaust
- Replacing the drive belt
- Inspecting the wiring and earthing
Care tips
- Make sure the dryer is properly earthed
- Clean the lint filter after every cycle
- Have an electrician confirm the cables and panel are rated for the dryer's load
- Heating-coil tests with a multimeter are a technician's job, done after isolating the power at the panel during periodic maintenance
Questions
It does not heat — what is the cause?
Usually a burned-out heating element (all of it or one coil), or a tripped thermostat or safety cut-off. The technician tests the heaters after isolating the power at the panel. Call 16062.
The breaker trips — what is the cause?
Usually a heating element or a wire shorting to the dryer's body. That is dangerous — don't run it or reset the breaker again until it has been inspected.
Do you repair Miele Professional dryers?
Yes — we repair Miele Professional electric dryers, such as the PT 8000 series.
Steam Industrial Dryer Repair for Hotels
Steam-heated dryers suit large hotels with a central steam boiler and heavy laundry volumes: they heat with a steam coil fed from the boiler, so they are economical to run when steam is available. We repair steam dryers from Electrolux Professional, Girbau, Lavatec and other brands. Call 16062.
A steam dryer has a large steam coil, a steam solenoid valve, a steam trap, a condensate return line, a drum motor, a blower and a lint filter. It is connected to the central steam boiler, and the steam pressure must stay within the limits on the dryer's rating plate. Common faults: a failed steam solenoid valve, a faulty steam trap, a steam coil clogged with deposits, or a weak condensate return.
Signs it needs service
- The dryer does not heat (no steam coming in)
- Low steam pressure in the coil
- Hot water leaking from under the unit
- The steam trap leaking or passing live steam
- Drying time has increased noticeably
Common faults
- Burned-out steam solenoid valve
- Faulty steam trap (wastes steam for no benefit)
- Steam coil clogged with lime scale
- Blocked condensate return pipe
- Faulty pressure reducing valve
What we do
- Replacing the steam solenoid valve
- Replacing the steam trap
- Descaling the steam coil
- Cleaning the condensate return
- Inspecting the pressure reducing valve
- Checking the dryer's steam connections for leaks
Care tips
- Make sure the steam pressure stays within the limits on the dryer's rating plate and manual
- Have the technician check the steam trap regularly — a leaking trap wastes energy
- Descale the steam coil as part of periodic maintenance
- Make sure the condensate returns to the boiler — and never open a steam connection while the line is under pressure
Questions
The dryer does not heat even though the steam boiler is running — why?
Usually the steam solenoid valve isn't opening, the steam trap has failed, or the steam pressure reaching the dryer is too low. This is a job for a technician — steam lines are hot and under pressure. Call 16062.
Do you repair Lavatec steam dryers?
Yes — we repair Lavatec and other steam dryers.
Hotel Dryers service areas
We cover Cairo, Giza, Qalyubia, Alexandria, Matrouh (North Coast), Sharqia, Gharbia, Dakahlia. Not sure about your area? Call 16062 and we confirm before booking.
- Cairo
- Giza
- Qalyubia
- Alexandria
- Matrouh (North Coast)
- Sharqia
- Gharbia
- Dakahlia
How We Work
- 01
Call 16062
Tell us the dryer type (gas, electric or steam), the brand, the capacity and the fault.
- 02
Schedule the Visit
We book the earliest available slot for your area — visits run daily 9 AM–9 PM in the governorates we cover.
- 03
Diagnosis + Price
An inspection of the heating, drum, bearings, sensors and exhaust, and a clear written repair price before any work.
- 04
Repair + Testing
Repair with original or compatible parts, depending on the part and model, then a full-cycle test and temperature adjustment.
- 05
Invoice + Warranty
An official invoice and a 6-month written warranty on the repair and the replaced part.
Book your industrial dryer service
at the earliest available slot for your area
- 6-month written warranty on the repair and the replaced part
- Technician visits daily from 9 AM to 9 PM
Why Agent Site?
Call 16062
An industrial dryer technician at the earliest available slot for your area — visits daily 9 AM–9 PM in the governorates we cover.
Expertise in 3 Heating Systems
Gas, electric and steam — each system has its own faults, maintenance and spare parts.
Gas Dryer Safety Checks
On gas dryers we check the burner safety components: the flame sensor, the gas valve, the igniter and leaks at the appliance connection.
Industrial Spare Parts
Heavy-duty heating elements, bearings, belts and other industrial parts — original or compatible, depending on the part and model.
Tips to Extend Your Industrial Dryer's Life
- Clean the lint filter after every cycle — built-up lint raises the fire risk and energy use
- Clean the exhaust ducts regularly (about every 3 months under heavy use) — lint collects inside them
- Have the technician check the drum bearings during periodic maintenance — any metallic noise is a warning sign
- On gas dryers, have a qualified technician check the gas connections regularly; any gas smell means stop using it and call the gas emergency line 129
- Never dry linen with solvents or oils on it, even after washing — it is a fire hazard
- Let the dryer finish its cool-down phase before unloading — hot linen left in a pile can catch fire
Frequently Asked Questions
Which dryer type is best for a hotel: gas, electric or steam?
Gas: usually the fastest and cheapest to run; it needs a natural-gas line prepared by the gas company and a strong exhaust system. Electric: the best fit for hotels without gas, but it uses a lot of electricity. Steam: the most economical for hotels with a central steam boiler and heavy laundry use.
Is lint buildup in the exhaust ducts dangerous?
Yes — lint in the exhaust ducts is one of the most common causes of dryer fires. Clean the filter after every cycle and the ducts regularly (about every 3 months under heavy use). Call 16062 for duct cleaning and a dryer check.
Do you repair Electrolux Professional dryers?
Yes — we repair Electrolux Professional gas, electric and steam dryers, using original or compatible parts, depending on the part and model.
There is a gas smell near the gas dryer — what should I do?
Shut the gas valve if it is close and safe to reach, open the windows, don't touch any electrical switch (including the dryer's own controls) or use any flame, leave the area and call the gas emergency line 129 — for a fire, call 180. Once the area is safe, book us on 16062 to check the burner and gas valve before the dryer runs again.
Can we arrange periodic maintenance?
We can agree on periodic maintenance visits for your dryers: cleaning the filters and exhaust ducts, and checking the heating, drum bearings and safety sensors. Call 16062 to discuss the details.
Do you install a new industrial dryer for a new hotel?
Yes — we help you choose the capacity and type (gas, electric or steam) to suit the hotel's utilities, then install the dryer, connect it to the prepared gas, power and steam points (the gas line itself is prepared by the gas company), fit the exhaust ducting and test it.
What is the typical lifespan of an industrial dryer?
Many years with regular maintenance — its life depends on running hours and upkeep. The parts replaced most often are belts, bearings, temperature sensors, and the heaters or igniters, depending on the type.
Do you cover hotels on the North Coast and the Red Sea?
We cover the North Coast (Matrouh) at the earliest available slot for the area. The Red Sea and South Sinai are not in our service area at the moment. We cover Cairo, Giza, Qalyubia, Alexandria, Matrouh, Sharqia, Gharbia and Dakahlia.
Need an industrial dryer technician now?
Lint built up in the dryer and its exhaust ducts raises the fire risk. Call 16062 for periodic maintenance and duct cleaning.
← All devices