Industrial breaker washer repair — the backbone of any commercial laundry or hospital. They feature huge capacities (50-200 kg) and a heavy-duty steel frame built for 24-hour continuous operation. Common brands in Egypt: Milnor, Girbau, Primus, Dexter, Danube. Call **16062** for specialist service.
An industrial breaker washer uses an advanced hydraulic suspension system to absorb the vibrations produced when spinning large loads at a high G-factor. It has variable frequency drive (VFD) motors for precise speed control, and programmed PLC systems for complex wash and chemical-sanitizing cycles. Common faults include main bearing wear from the heavy reciprocating load, inverter failure, and clogging of the large pneumatic drain valves.
The most frequent faults we encounter while servicing Breaker — ranked by occurrence.
Main bearing failure — 45%
VFD inverter board burnout — 20%
Clogged or failed pneumatic drain valves
Worn mechanical seal letting water into the motor
Broken or loose drive belts
Faulty weight or water level sensors
Failed control display or operating buttons (HMI panel)
Clogged chemical injection nozzles
Replacement of genuine heavy-duty bearings and seals
Repair or programming of inverter and PLC boards
Full mechanical overhaul (drum and shaft refurbishment)
Replacement of pneumatic and electric drain valves
Replacement of drive belts and mechanical tension adjustment
Cleaning and sanitizing the chemical and detergent injection circuit
Repair of control panels and touch screens
Calibration of temperature and water level sensors
A technician specialized in each brand — click your brand for its detailed page.
Yes, we have heavy-duty pullers that allow bearing replacement on site without needing to move the machine, saving time and cost. Call 16062 to arrange the job.
Disconnect the power immediately and call us. The cause may simply be overheating, or a board fault that needs electronic repair rather than a costly replacement.
Under industrial operating conditions (16 hours a day), it ranges from 4 to 6 years, and is shorter if the rated load limits are not respected.
On-site diagnosis, clear pricing before any work, and a 6-month written warranty.