Insulation panel repair and restoration in Egypt — panels are what hold the cold in, and any gap between them causes huge cooling loss and ice buildup. We supply polyurethane panels in all thicknesses. Call **16062** for restoration and insulation.
Panels consist of two galvanized steel skins with polyurethane (PU) foam between them at a density of 40-42 kg/m3. We repair the cam-lock joints, inject foam into gaps, and replace the metal flashing. The common faults are corrosion of the lower steel skin and air leakage from the joints.
The most frequent faults we encounter while servicing Panels — ranked by occurrence.
Failed silicone and mastic sealant between panels — 50%
Steel corrosion from high humidity and salts
Broken internal cam-locks due to poor installation
Loss of foam density from age or high heat
Re-sealing joints with thermal tape and food-grade silicone
Injecting polyurethane foam into the gaps causing leakage
Replacing damaged or broken panels with matching ones
Fitting and renewing the metal corners and flashing
Insulating floors with reinforced foam and epoxy
Yes, our technicians are skilled at removing and refitting panels locally without dismantling the whole room.
For freezing (-20°C), a thickness of 12 cm or 15 cm is preferred to ensure the lowest heat loss and lowest electricity consumption.
On-site diagnosis, clear pricing before any work, and a 6-month written warranty.